Empulse Break In Schedule
From Brammo Owners Wiki
Here are the break in period instructions from the Empulse R Owner's Manual - Rev 02.
Break in Period
- For odometer reading of 0 - 600 miles, use normal mode only.
- For odometer reading of 0 - 150 miles, ride at no more than 3500rpm.
- For odometer reading of 150 - 600 miles, ride at no more than 5000rpm.
- At odometer reading of 600 miles, change oil.
After Break in Period
- Every 3000 miles, perform an oil change and inspect clutch plates and springs. Replace components if required.
- Oil volume: Use oil fill hole for correct level.
- Oil type: Synthetic 10W-30 API GL-1 Motorcycle oil, (wet clutch approved).
- Clutch plate friction material type: Organic, please use SMRE original parts.
| Miles: | 150 | 300 | 450 | 600 | 3600 | 6600 | ... |
|---|---|---|---|---|---|---|---|
| Max RPM | 3500 | 5000 | 8200 (redline) | ||||
| Allowed Modes | Normal only | Sport and Normal | |||||
| Service | Oil Change | Oil Change | Oil Change | ... | |||
| Lube chain | Lube chain | Lube chain every 300 miles | |||||
References
- Manual screen shot from Ain on the forum: http://brammoforum.com/index.php?topic=1717.msg13057#msg13057
