Difference between revisions of "Empulse Setting The Time"
From Brammo Owners Wiki
(Created new page on how to set the time) |
(No difference)
|
Latest revision as of 05:28, 14 February 2013
The time and date on your Empulse were set at the factory to Pacific Standard Time. If you need to adjust the time on your Empulse:
- Connect the charging connector to the Empulse and a wall outlet. This will put the Empulse in charging mode.
- Press and hold the Mode (Black) and Trip (Green) buttons simultaneously for approximately two seconds to enter Setup mode.
- Press the Mode button (Black) to select either HOURS or MINUTES.
- Press the Trip (Green) button to increase the selected setting.
- Once you have finished adjusting the time, press the MODE button to select EXIT and then press the Trip button to confirm.
- Note: If no button is pressed for more than 30 seconds, the Empulse will revert back to Charging mode.
- Disconnect the charging connector from the Empulse.